How to make a homemade pocket pussy 2023? Unlocking the Mystery of how to make a homemade pocket pussy!

Men’s sex toy sales have gone up by over 1,000% in the last 10 years – online sex shops have made it easier for guys to buy Fleshlights and pocket pussies with confidence. But with the best Fleshlights costing upwards of $70, many guys are using household items to make DIY Fleshlights for cheap.

DIY Fleshlights & Homemade Pocket Pussy Ideas You Can Make Tonight

With men’s sex toy sales skyrocketing in the past decade, many guys are looking for cheaper ways to experience the pleasure of a Fleshlight or pocket pussy. Luckily, there are countless household items that can be transformed into DIY sex toys with a little creativity and effort. In fact, we’ve compiled a list homemade pocket pussies that anyone can make tonight! These DIY Fleshlights are easy to construct and provide intense stimulation. To make things even easier giving you step-by-step instructions on how to make them from scratch. So why spend upwards of $70 on a store-bought sex toy when you can create your own personalized Fleshlight right at home?

What Are Pocket Pussies For?

Whilst pocket pussies can be used simply for pleasure, there are other aspects that make them useful. For example, men who want to build up sexual stamina can use a pocket pussy to raise their ejaculatory threshold before orgasm, and those suffering from premature ejaculation can use artificial vaginas to help them last longer.

Single men may also find a pocket pussy good company if they are without a partner, and couples can use pocket pussies together for variety. They are also great substitutes in a relationship where penetrative sex is not possible. Examples of this include during menopause, religious preferences, pregnancy, when no contraceptive is available, or times of menstruation.

Lubrication is Essential

When using a pocket pussy, lube is essential. No artificial vagina will produce natural lubrication. It is possible to cause damage to the penis without sufficient lubrication, so choose a good lubricant when playing with an artificial vagina to avoid any trips to the emergency room. A torn foreskin will bleed and will panic the victim to extreme lengths.

Why should I make a DIY pocket pussy?

Towel and latex glove

One of the most popular ways to make a DIY pocket pussy. There are many variations on this homemade Fleshlight, but the basic idea is that you roll out a towel and fold it in half. Next, place a latex glove or a condom inside it, leaving the end sticking about an inch out. Then you simply roll up the towel, use some rubber bands to hold it in place, and voila!

This is one of the best ways to make a tight faux pussy – just be sure to use lots of water-based lube. Just make sure that you’re not allergic to latex before you stick your dick in!

Never use oil-based lube with latex condoms or gloves – the oil breaks down the latex and quickly destroys it. Water-based lube is cheap and works well with latex.

Step 1: Place your toothpaste tube into the rubber glove.

Step 2: Take that glove and lay it on one end of the towel, with about an inch of the open end of the glove hanging beyond the edge.

Step 3: Roll the towel up around the toothpaste and glove.

Step 4: Wrap one rubber band around each end of the towel to keep it from unrolling.

Step 5: Remove the toothpaste tube. You’ll notice there’s a schlong-sized space in your rolled towel now. Thank you, toothpaste.

Step 6: Take the overhanging part of the glove and stretch it around the lip of the towel. You can even tuck it beneath the rubber band to keep it in place.

Step 7: Dribble a bit of lube into the opening of the glove, and voila! Your very first DIY Fleshlight!

Toilet paper roll

If you’re looking for a cheap pocket pussy, it doesn’t get much cheaper than a toilet paper Fleshlight! Take a toilet paper roll, remove the cardboard center, and then pull a condom/latex glove through the middle, stretching it over the other side if you wish. Once you’re done, simply throw the condom away.

Unless you’re a very aggressive masturbator, you could probably still use the loo roll after.

Step 2: Stick your glove through the center of the hole with at least an inch of the cuff hanging out.

Step 3: Stretch the glove’s cuff all the way around the outside of the roll. If it doesn’t reach, you may need to unwind the toilet paper a bit to make the roll smaller. Then seal with a rubber band.

Step 4: Lube!

There are a couple versions of the toilet paper pocket pussy; most involve rubber gloves or condoms to catch your spunk in. It doesn’t feel remotely like a real pussy, but it sure is cheap! When I made my own version of this, I preferred using latex gloves. I also used some rubber bands to keep the toilet paper nice and tight – tightness is very important!

The Sock Sucker

Your homemade sock sucker pocket pussy takes the cake for easy solutions. Who doesn’t have socks lying around, waiting to be swept away on a romantic retreat?

Step 1: Take a pair of socks, stacked side-by-side and lay them down on top of each other.

Step 2: Fold in the toes of the sock pair about an inch or so, then rest your latex glove on top of them with a bit of the open end hanging past the edge of the folded toes.

Step 3: Take your second pair and lay them on top of the glove, also with the toes folded inward toward the glove. This will make one end of your sock-glove-sock sandwich thicker and sturdier than the rest.

Step 4: Stretch and wrap the overhanging cuff of your glove around the folded toe end of your socks. Use a rubber band to keep it in place. You’ll see now that the opening of your suck sucker pocket pussy is almost ready for action.

Step 5: Take your third pair of socks and wrap them around the middle of your DIY pocket pussy for an extra thick grip. Seal that sucker with a rubber band.

Step 6: Squirt some lube in the opening and get to it!

Pringles Can Pocket Pussy, New and Improved!

The Pringles can DIY Fleshlight is quite the popular stroker project!

However, I’ve made a few improvements to make your homemade sex toy even better than the original.

For instance, I added a sponge to the top, which has a split in the center, that feels more like entering a nice, tight vagina instead of the aggravation of adding something around the rim of the can.

Here’s what you need to make your own Pringles can Fleshlight.

Supplies:
Pringles potato crisps can
5 cellulose sponges (I got a 2 pack for $1 at The Dollar Tree)
2 rubber bands or duct tape
1 stretchy exam glove (so you can reuse your new DIY sex toy)

Supplies to create a DIY Fleshlight from a Pringles can
Step by step guide:
Step 1. Wipe out the chip can with a paper towel. Place 4 sponges on top of one another – end to end -, along the sides of the can.

Step 2. Take the 5th sponge and carefully cut a slit in the center of it. Place it over the opening of the can and secure it with a rubber band or duct tape.

Step 3. Place an exam glove into the slit and push it half way into the can.

Step 4. Stretch the opening of the glove over the can and sponge then secure it with a rubber band.
Step 5. Lube up and enjoy yourself! After use, simply remove the glove and toss it in the trash. That way, you can use this DIY pocket pussy over and over again!
Tips
For one-time use, wet your sponges with warm water. Skip the exam glove, lube up and enjoy the warm, squishy wetness. When finished, simply toss the entire can in the trash. With the cost of chips and sponges, your disposable pocket pussy would cost around $3.50 USD

You can also use different sized sponges inside the can, for instance, large, car wash sponges. Or, double the number of small sponges to make your masturbator tighter.Pringles can DIY Fleshlight using beads to add texture
The super deluxe crisp can: Before adding the top sponge, dangle a few sets of plastic beads into the can. Continue with the final step and you have a DIY pocket pussy with exciting texture!

New and Improved Party Balloon DIY Pocket Pussy

You’ve probably seen the party balloon DIY pocket pussy all over the internet. Personally, I have no idea how that could possibly feel good! And if one of those balloons pops, that might not feel pleasant on your erect penis.

So, I thought about it and came up with a new and improved party balloon homemade pocket pussy. The best part is, that if a balloon pops, it will feel like a squirting vagina instead of a painful snap!

Steps 1 and 2. Fill the party balloons about 1/8-1/4 full using warm water. Place them into the plastic container, alternating side-to-side.

Step 3. Push the fingers of the glove down, in between the balloons.

Step 4. Carefully stretch the opening of the glove over the rim. This keeps the balloons from falling out as well as prevents you from having to rinse off the balloons after each use.

Squirt some of your favorite lube into the glove then slather it on yourself and have some fun. When finished, simply pull out the glove and toss it in the trash, Place the lid on the container and put it away for another day!

Tips:
Fill the balloons with vegetable oil instead of water. It takes a bit more finesse to do, but it will give you a completely different feel.

Dangle some cheap, plastic party beds among the balloons for some texture.

Before using your homemade pocket pussy again, soak the water-filled balloons in hot water for about 15 minutes so they are warm. Or, if you enjoy temperature play, put some of your balloons in warm water and some in the freezer!

Banana masturbator

Take a fresh banana and cut one end off with a knife. Squeeze out the fruit from inside until the peel is now empty. Don’t worry if you leave a little banana residue – it can act as a makeshift lube! Simply pop your cock into the banana and get jacking! The closed end catches your cum, which is super convenient.

We covered a variation of this banana masturbator technique in our male masturbation techniques guide recently. Feel free to add your own personal lubricant if the natural banana lubrication doesn’t do it for you. You’re throwing it away after, so any type of lube will be fine.

If you’re feeling creative, various fruits and vegetables can be willing receptacles for the adventurous man’s attention. Though boning a banana is an incredible accomplishment, feel free to stretch your imagination with squash or melons as well. (We don’t recommend eating/repurposing them afterwards… but you do you.) peeled banana

Step 1: Cut off one end of the banana peel.

Step 2: Squeeze out the banana without ripping the peel.

Step 3: Although the inside of the peel is already fairly moist, it always helps to add some lube of your own.

Step 4: Slip in a banana of your own and go to town! Make sure to clean up well afterwards.

Plastic bottle and damp sponges

This DIY pocket pussy is extremely easy to make with things most everyone has around the house! Therefore, it may not cost you a penny to create.

Step 1. Cutting the bottle.
Rinse your bottle and allow to dry so the stuffing doesn’t stick to the sides. Using a bread knife, cut the top off the bottle, making sure the opening is big enough for your erect penis.

Step 2. After the top is cut off.
Trim any excess plastic with scissors and smooth any edges with sand paper. However, that’s not required, since we are covering the entrance with a sponge.

Step 3. Stuffed with fiber fill.
Now, stuff the bottle fully with the fiber fill fluff or pillow filling; be sure you put in plenty so the sides of the bottle will still stimulate you without feeling hard.

Step 4. Once filled, place your fingers in the center of the bottle and make a hole for your penis.

Step 5. Measure the sponge before cutting a slit.
Step 6. Cut the sponge in the center.
Next, take a sponge that covers the entire opening and cut a slit in the center.

Step 7. Secure the sponge down with duct tape.
Using strong duct tape, secure the edges of the sponge all the way around the bottle.

Step 8. Placing a medical glove in the slit and stretching it over the sponge.
Next, push a stretchy medical glove through the slit and fold the opening over your sponge.

Before sliding in, be sure and lube up the inside of the glove and your penis! Once you’ve had a hot session with your new DIY pocket pussy, just pull out the glove and toss it. That way, you can use your stroker over and over again.

Tips
Instead of using a medical glove, you can always put on a condom.

Choose a bottle with ridges inside, as I did, for extra texture and stimulation. You can also use a more flexible bottle so you can squeeze as you stroke.

Get a warm and cozy solo session by wrapping your homemade pocket pussy in a hot water bottle or heating pad for about 30 minutes beforehand.

Cucumber Pussy

This suits: Beginners, and those who are looking for an easy way to build a pocket pussy. It may also suit variety seekers and those who like a cool feeling around the penis.

Step 1. Cut end off cucumber

Step 2. Cut the cucumber in half lengthways.

Step 3. Open the cucumber up and remove seeds from both sides. Once the seeds have been removed, take out small amounts of cucumber flesh until both sides fit snugly around the penis.
Step 4. Once the preferred tightness is found, secure with rubber bands to keep the desired tension.

Step 5. Wrap the cucumber with insulation tape or Duct tape. At this point the user is able to accommodate any tightness preferences.

Step 6. If preferred, a condom can be placed inside the cucumber. To do this insert the condom before duct-taping the halves back together.

Step 7. Stretch the condom rim over the cucumber edges and fold back.
Step 8. Even though the cucumber will feel wet, lube is important as it will not remain wet for long.

Happy Birthday Pussy

This suits: Someone who wishes to easily dispose of evidence, and likes something bigger to hold on to.

You’ll need: Four balloons, latex glove, container bigger than a Pringles tube that will fit four partially inflated balloons, such as an inner bathroom bin bucket, duct tape.

Step 1. Place the balloons inside the container with the inflation holes hanging outside.

Step 2. Blow a little air into the balloons.

Step 3. Place a latex glove into the middle of the balloons, with fingers pointing inside, and the cuff protruding from the top.

Step 4. Blow up the balloons to the desired tightness, and tie the ends to stop air escaping.

Step 5. Tape the tied balloon ends to the outside of the container.

Step 6. Cut the ribbed cuff from the latex glove, as this enables it to stretch.

Step 7. Stretch the glove cuff out, pull it over the balloon ties, and down the container edge so the opening is smooth.
Step 8. Tape into position.

Cornstarch Jelly Jammer

This DIY pocket pussy is the most complicated option, but it’s the closest thing to a real fleshlight I’ve found.

corn starch

Step 1: Pour the cornstarch into your glass.

Step 2: Add 100ml of water and stir well.

Step 3: Add another 100ml of water and stir that bad boy again.

Step 4: Put your concoction into the microwave for one minute.

Step 5: You’ll see the mixture begin to solidify. Now poke a hole in the center of the mixture and push it down to an inch shy of the bottom. Make sure your hole is not quite as wide as your member.

Step 6: Microwave for another 30 seconds.

Step 7: Pop that sucker in the fridge for about an hour, add a bit of lube, and then you’re ready to rumble!

The Love Plushie

Sure, sticking your dick into a plush toy may seem a bit strange to some. However, this is an extremely discreet way to masturbate without anyone knowing you have a sex toy! Just make sure you choose a plush toy that you can sit on a shelf or in your closet that matches your style and personality.

Steps 1. Find an area of the toy that’s on the underside and using scissors or a knife, poke a hole in the fabric.

Steps 2. Gently tear the fabric to create a hole to accommodate your penis size.

Steps 3. Put your fingers inside the toy and move the fiber fill around, making a canal for your penis.

Steps 4. Then, place a stretchy glove inside the hole.

Steps 5. Lube the inside of the glove and enjoy your homemade pocket pussy. When you’re finished, just pull out the glove, toss it and put your plushie on a shelf or in the closet. You can also use your toy by simply wearing a condom.

Tips
Search for a plush toy that’s more masculine like a snake, dinosaur or even one of your state’s sports mascots; something that wouldn’t seem odd for you to own.

When using your homemade masturbator, keep your thumbs on the edges of the glove if your toy isn’t narrow enough to stretch the glove over.

Put your love plushie under a heating pad or blanket before use for a warm, soft solo session.

Candy Cup

This do-it-yourself pocket pussy is quite popular. Sure, you can follow those instructions if you choose. However, I have tweaked this design to give you crazy-good texture that you’ll feel a lot more than gummy candies!

Supplies:
A tall, plastic drink cup (I found one at The Dollar Tree for $1)
Hand towel or dish towel
Stretchy medical glove
Rubber bands
Non-chocolate candy of your choice (I suggest Red Vines licorice for amazing texture; $1 at The Dollar Tree)

Steps 1. Roll the hand towel.
Fold your towel in half, long ways.

Steps 2. Place the glove on the edge of the hand towel.
Lay the glove at the end of the towel with a few inches of the opening of the glove hanging over.

Steps 3. Next, take the candy of your choice and lay it next to the glove in a pattern or randomly.

Steps 4. Rill the hand towel with the glove and candy inside.
Now, start rolling your towel carefully, making sure you leave enough room for your penis inside.

Steps 5. Towel should look once it is rolled up.
The towel should look like this when finished. If the glove isn’t sticking out enough, gently pull until a few inches are sticking out.

Steps 6. Rolled towel inside the sports cup.
Place the rolled towel inside of your cup; the opening of the glove should now be sticking upward.

Steps 7. Fold the glove down over the rim of the cup and secure it with a rubber band.
Fold the glove down, stretching it over the opening of the cup. Finally, secure the glove with a rubber band, if necessary.

Steps 8. Now, lube the inside of the glove up with a water-based lube and go to town on your sweet candy cup DIY masturbator! When you’re finished, pull out the glove and toss it in the trash. If you want to, disassemble your sex toy, eat the candy and take a nap.

Tips
Instead of using candy, get creative by using Mardi Gras beads, bungee cords, marbles or anything else you can scrounge up around the house to create texture.

Using a towel with ribbing or other textures will only add to the sensations of your homemade sex toy.

Experiment with different sized cups and towels with varying thickness.

Silicone Pussy

This suits: Those who don’t mind waiting for their pleasure, and those who are looking for a multi use pocket pussy.

You’ll need: A candle bigger than a penis, sharp knife, silicone sealant.

Step 1. Measure the penis width and length against the candle.

Step 2. Draw markers into the candle approx 25% smaller than the measured penis.

Step 3. Cut off two sides of the candle lengthways at the 25% mark.

Step 4. Cut off the remaining two sides to create a solid rectangular shape.

Step 5. Smooth the sides down so the candle resembles a carrot, but keep its girth at 25% smaller.

Step 6. Cover the candle in silicone sealant, approx half an inch thick.

Step7. Leave for several weeks until the silicone is totally dry.

Step 8. Remove the candle and dispose of it, or if a successful size, keep it for further silicone pussies.

Step 9. The remaining mould is the pocket pussy. It can take several attempts to get the correct sizing, but it’s worth the effort, as it can be re-used.

Optional: Cut notches into the candle to add texture to the mould.

Tips On How To Make A Pocket Pussy Work For You

Hands-free Options

By their nature, pocket pussies are small and compact. This makes them great for travelling and storing discreetly, but it’s not satisfying if the user is looking for something to get hold of.

It’s possible to incorporate a pocket pussy in a homemade ‘hands-free’ device by placing it in the body of a towel stack. It’s also possible to put the pocket pussy in a rolled duvet that’s secured with a belt. This gives the user an option of lying on top or standing up.

Other options include the gap between sofa cushions or the stair rails. Once the user is looking out for a hands-free option they become numerous.

Adjusting the Temperature

Unless the user likes a cold feeling on the penis, it’s desirable to add some warmth to the pocket pussy for a more realistic feeling.

This can be done in several ways.

1. Soak towels in hot water, or if possible, immerse the whole object in a hot bath.

2. Leave it in the sunlight, on the hot water tank, or on a radiator.

3. Use a warming lube.

4. Microwaving a pocket pussy is an option, but this must be done with caution. Ensure there are no metal parts and that the inside of the pussy is not roasting hot afterwards.

Be careful of:

1. Sharp Edges. Ensure that all sharp edges are carefully covered in Duct tape or wrapped in a soft contact body. Paper, card and plastic can deliver nasty cuts, as can rough edges of silicone. Never use glass to make a pocket pussy for obvious reasons.

2. Vacuum. Physics demonstrates that friction builds a vacuum. This can result in a situation where the penis becomes stuck inside a masturbator. This is why intact bottles should never be used as a masturbation aid. Ensure that all home built pocket pussies have vacuum releasing holes. Soda bottles and Pringle tubes must always have a small hole cut in the bottom. Some vacuum is desirable as it replicates the feeling of a real vagina, but too much vacuum will be uncomfortable and at worst, painful.

3. Friction. Friction can cause nasty burns, and it’s easy to get carried away in the moment. Friction burns can arise from any non slippery surface, such as the towels, balloons and silicone options listed above. Always use lube to ensure friction does not build up, and be sensible about the contact surface. Condoms and latex gloves are the best contact surface options, but buy good quality, especially latex gloves as the cheap versions tear easily.

My Verdict: Homemade Masturbators VS Fleshlights

The outcome of this experiment surprised me: the homemade masturbators I tried (with a few exceptions) were a lot better than I expected them to be.

I must admit I was very skeptical before I began. I have owned many Fleshlights over the years and nothing else I have tried even comes close to them for realism and enjoyment.

I expected the homemade Fleshlights to be disappointing (and a bit embarrassing). So I was very pleasantly surprised by how much I enjoyed trying some of these designs.

Everything I needed was either already in my home or a quick (cheap) supermarket trip away.

The process of making each of the masturbators (with the exception of the last) was a lot easier than I expected. Getting the sizing right was fiddly but once you have figured it out it should be easy to repeat.

My favorites were the soft and flexible Sock Masturbator and the easy-to-make Toilet Paper Roll Masturbator.

My conclusion? Homemade male sex toys and masturbators can be decent alternatives to real Fleshlights. They are not the same (not even close) but they are a great way to get a little bit more pleasure from your masturbation sessions.

GET YOUR OWN FLESHLIGHT
If you really want to level-up your masturbation nothing beats a Fleshlight. The material is soft and pliable, the textures range from gentle to intense, and the orifices are sometimes very realistic.

If you have ever considered getting one I would strongly encourage you to start shopping.

Benefits of a Homemade Pocket Pussy

Homemade pocket pussies are the preferred masturbation aid for some men because they are custom built to fit the user’s shape. Any kinks, bends, or size issues can be worked around. Tightness issues are accommodated with a bespoke pocket pussy too. Shop bought portable vaginas are excellent, but sometimes the homemade method suits better, especially if the user likes to add textures and temperatures to the experience which are beyond what the market can offer.

Homemade pocket pussies are a good choice for those who have inquisitive children or a partner who disapproves of sex toys too, as they are easily made with no special resources. They can also be quickly disassembled or simply thrown away after use. The problem with a Fleshlight or similar masturbator is that they are obviously sex toys. If there is no discreet place for such possessions, then a homemade option is the only route to follow.

Do-it-yourself portable pussies are ingenious and easily made, but if the crafting, adjusting and latex gloves don’t appeal, then a good halfway option is the Fleshlight build your own kit. This enables the user to create a masturbator to their own preference, but negates the need for balloons and Pringle tubes.You deserve to spice up your “you time!”
At the end of the day, no homemade pocket pussy is better than another. It’s all about what works for you. So, go ahead. Explore your options and have some fun.

Don’t forget, when it comes to pleasuring yourself, there is no wrong answer. You deserve to feel good. And if you want to MacGyver your “me-time” a bit? Good on you.

After finding the right DIY male masturbator for you, the next step in your self-satisfaction sexcapades is to explore the real thing.

Conclusion

Making a DIY stroker is pretty easy to do, not to mention being inexpensive or even free! Plus, many of the do-it-yourself pocket pussies and Fleshlights above are discreet, easy to hide and you can use them over and over again. But the best part is that you can choose a texture you like or try several; after all, you are the one creating it! So, gather your supplies and start creating!